Philips HeartStart FR-2 Aviation Battery

SKU: 989803136291

Sale price$275.00
Upload Tax Exempt Form here. Taxes refunded upon verification.
Select a file to proceed.
  • Discontinued
Notify Me When Available

This aviation-approved battery pack has the FAA TSO C-142 specification label on it.

No special reprogramming or installation steps required.

Philips AEDS operate on battery power only, so it is advisable to have an extra Battery Pack on hand.


  • Battery type: 12 Volt CD, 4.2 Ah, lithium manganese dioxide. Disposable, long-life primary cell.
  • Capacity: When brand new, a minimum of 300 shocks or 12 hours of operating time at 77 degrees F
    (25 degree C).
  • Shelf life (prior to installation): Usually, 5 years from date of manufacture when stored under
    standby environmental conditions in original packaging.
  • Standby life (after installation): Usually, 5 years. >4 years when stored under standby environmental
    conditions (battery installed, FR2 or FR2+ unused).
  • Storage temperature: +32 degrees to 109 degrees F (0 degrees to +43 degrees C).
  • Shipping temperature: -4 degrees to +140 degrees F (-20 degrees to +60 degrees C).
  • Battery limitations: Per battery labeling, never charge, short circuit, puncture, deform, incinerate,
    heat above 60 degrees C, or expose contents to water. Remove the battery from your AED when
    discharged.
  • Maintenance and calibration requirements for continued airworthiness: None. For general battery
    maintenance, please see your FR2/FR2+ Operator's Manual.
  • Aviation Standard Compliance: Meets FAA Technical Standard Order C-142. It is the responsibility of
    the aircraft owner or crew to install this battery in a specific class of aircraft to determine that the
    aircraft installation conditions are within the TSO standards.
  • Environmental qualification per RTCA/DO-227, Section 2.3: Passes parameters set forth for
    vibration, shock, temperature cycle, altitude, decompression, and humidity. Meets following
    acceptance criteria: No leaking, venting, distortion, fire, or rupture. Change in open circuit voltage
    <2%.

You May Also Like

Recently Viewed